Lost Mary TP800 vaping tips for better cloud production
The Lost Mary TP800 can produce a substantial cloud when the pod, power and airflow work together, but quantity should never be treated as a measure of safety. Nicotine is addictive, and the aerosol still exposes users to harmful substances. This guide is for adults who already smoke or vape; keep nicotine products away from children and non-users.
Before changing settings, check the TP800 manual and the exact pod or refill specification listed for your unit. Do not assume that a BM600, BM600S or BM6000 listing describes TP800 behaviour. In Australia, most nicotine vaping products have been sold only through licensed pharmacies since 1 July 2024, generally against a valid prescription, while importing them by mail or buying them informally is prohibited. Stock and access can differ between Sydney, Melbourne, Brisbane and other cities, so confirm the lawful route before buying. Australian vapers commonly call e-liquid “juice” and use “cloud chaser” for dense-vapour enthusiasts.
Know your TP800 setup
Start with a clean, correctly fitted pod and a battery charged as the manual directs. Check the TP800 guidance for its supported power range, airflow control, pod connection and any coil or operating modes. A device that powers on is not proof that every component is seated correctly, so inspect the seals and electrical contacts before chasing vapour output.
Use only a pod or refill explicitly listed as compatible with your TP800. Do not assume that a Tappo-format pod, BM600-series device or third-party refill will work simply because the connector looks similar. The Tappo pod compatibility guide is useful for checking fit, but it is not a substitute for the instructions supplied with the device or pod.
Think of cloud production as a system rather than a single setting. Liquid composition, coil condition, power, airflow and draw style all affect the result. If one factor is wrong, turning up the power may compensate by heating the coil harder and producing a harsher draw instead of better flavour.
Tune power and airflow
If the power is adjustable, begin at the lower end of the manufacturer’s recommended range, especially with a new pod. Increase gradually while the coil remains properly saturated. Too little power can leave a weak, muted puff; excessive power can dry the wick, create a burnt taste and make the aerosol hotter, so more cloud is not automatically a better experience.
If airflow is adjustable, change it in small steps and learn how the TP800 responds. A tighter setting generally creates more resistance and can support a denser draw, while a more open setting usually cools the vapour and makes sustained draws easier. Resist the urge to close every opening, because restricted airflow can also increase heat, throat irritation and the chance of pulling liquid into the mouthpiece.
Make one adjustment at a time and give it a few puffs before judging the result. If the TP800 has fixed output, leave it as supplied. Keep any adjustable device within its stated electrical limits, allow it to cool between longer sessions and stop if the pod leaks, the coil tastes burnt or the device becomes unusually hot. Mode labels on one Lost Mary model may not apply to another.
Prepare the pod properly
Nicotine strength does not determine cloud size, so choose the strength and liquid composition that suit your needs rather than assuming stronger nicotine means more vapour. Australian packs commonly state nicotine in mg/mL, so do not confuse that figure with a percentage. In broad terms, a higher VG proportion can support fuller, denser vapour, while a higher PG proportion usually provides clearer flavour and a lighter draw. Follow the pod and TP800 guidance on suitable liquids.
Freshness also matters. A pod that has sat unused, become partly empty or been stored in heat may deliver less flavour and weaker vapour. Check for leaks, damaged seals and lifted contacts before use, and keep spare pods upright in their packaging. If a refill system requires filling, follow its stated volume and priming instructions exactly.
Third-party refills require extra care because liquid viscosity, coil design and sealing can differ between brands. Check compatibility for the exact pod and TP800, and never force a refill or use a pod whose contacts are corroded. If fit cannot be confirmed, replace the pod rather than risking a leak, poor electrical contact or inconsistent performance.
Refine your draw
A steady, relaxed draw gives the coil time to vaporise the liquid evenly. Keep the mouthpiece sealed with a light closure and draw at a comfortable pace instead of trying to empty the device in one breath. A long, hard inhalation may increase the visible cloud for a moment, but it can also cool and irritate the throat.
Try a slightly longer draw before using much more power, then return to a comfortable rhythm. If the vapour feels thin, check the airflow and power before changing the liquid; if it feels harsh, open the airflow slightly or reduce the power. Comfort is a useful signal because repeatedly pushing through irritation can lead to an unhealthy pattern.
| Variable | Option A | Option B | Main trade-off |
|---|---|---|---|
| Power | Lower recommended power | Higher recommended power | Vapour volume may rise, but heat and wick-drying risk can increase too |
| Airflow | Tighter setting | More open setting | More resistance and density versus airflow and comfort |
| Liquid mix | Higher PG proportion | Higher VG proportion | Flavour clarity versus fuller vapour body |
| Pod condition | Fresh and saturated | Older or nearly empty | Stable performance versus declining flavour and output |
| Draw technique | Short and gentle | Longer but slow | Comfort versus a greater chance of throat irritation |
Use these comparisons as a diagnostic guide, not a target to maximise. A setting that produces a dense cloud but burns the pod, causes leaking or makes you cough is poorly matched to the device or liquid. Clean equipment, stable power and fresh compatible pods usually improve consistency more than extreme settings.
Keep the device in good condition
Clean the mouthpiece and accessible pod parts according to the manual, and let each section dry fully before reassembly. Do not flood the device or push cotton swabs into electrical areas. Replace a pod when the taste becomes burnt or vapour output falls, since a tired coil cannot be restored by raising the power.
Heat and humidity deserve special attention in Australia. Queensland summers, Melbourne’s warmer days and long-distance travel can expose a device to conditions that affect battery performance or e-liquid storage. Keep it out of direct sun and parked vehicles, and follow the storage range in the manual. If a pod has been left in extreme heat, let it return to room temperature before use.
For trips between Australian states, keep the device and spare pods secure and away from children in your carry-on. Check the airline’s current rules for batteries and vaping devices before leaving the airport, and follow the rules applying at each destination. Never pack loose nicotine liquid without the protective packaging and documentation required for air travel.
Choose an informed next step
Australian access rules should shape the decision before cloud settings do. Nicotine vapes are generally legal for adults to possess and use, but retail supply is restricted to the pharmaceutical system, most commonly with a prescription. Availability can vary across state and territory pharmacies, so verify what can legally be supplied in your area and avoid overseas sellers or untracked parcels.
If you do not already use nicotine, do not start vaping for the vapour. Nicotine dependence can develop quickly, and vaping is not risk-free. People who are pregnant or breastfeeding should avoid nicotine, and anyone concerned about their use should speak with a pharmacist or GP. Keep devices and pods secure from children, including in homes where a child might see a colourful device as a toy.
Set a sensible first goal: lawful supply, a correctly matched pod and the manufacturer’s recommended power range. For device-specific guidance, contact Lost Mary support with the TP800 model and pod details, then check the product guidance before making adjustments. Keep the power modest, change one setting at a time and replace faulty components rather than forcing more vapour.