Lost Mary TP800: How to Remove the Silicone Plug Safely

The Lost Mary TP800 is designed to make vaping straightforward, but its small silicone plug can cause confusion when you first open the package. This stopper protects the prefilled pod from leaks, dust and accidental activation during transport. It must be removed before the pod can deliver vapour correctly.

The plug is usually located on the underside of the prefilled pod or around an opening that connects with the device. Its exact position can vary between product versions and packaging batches, so check the printed instructions before handling it. Do not force a part simply because it looks removable.

For Australian adult smokers and vapers, buying from a reputable source matters. Products should clearly state their nicotine strength, liquid capacity and intended use, while nicotine warnings should be taken seriously. Keep the TP800 away from children, pets and anyone who does not vape.

Identify The Silicone Stopper

Start by opening the outer packaging with clean, dry hands. Keep the pod upright and inspect it under good light. The silicone piece may look like a small coloured tab, a flat rubber seal or a short plug sitting over the pod’s connection point. It is generally softer and more flexible than the surrounding plastic.

Do not mistake the silicone stopper for the mouthpiece, a decorative panel or a charging-port cover. If the TP800 is a rechargeable model, its USB-C port belongs to the battery section and should never be blocked with a pod seal. The pod instructions should show which protective piece needs to come away before use.

A genuine pod should have a clean, secure seal rather than one that is already loose or covered in e-liquid. If the package is torn, the pod is leaking, or the plug appears displaced, set the product aside. Liquid on the outside can irritate skin and should be wiped away with a tissue before the device is handled further.

Remove The Plug Without Damaging The Pod

Hold the pod firmly by its plastic body, not by the mouthpiece or the silicone itself. Use your fingernail to lift the plug’s edge or pull its small tab. Work slowly and straight outward. A gentle rocking motion can help loosen a tight seal, but avoid twisting aggressively because the opening beneath it may be narrow and delicate.

Never use a knife, needle, pin, tweezers with sharp tips or another metal object to prise the stopper out. Such tools can puncture the silicone, damage the pod connection or leave fragments inside the airflow path. They can also contaminate the e-liquid. A stopper that will not move with light finger pressure is a reason to stop, not to apply more force.

Once removed, place the plug in the rubbish and inspect the opening. Do not put it back in the pod, and do not vape if a piece of silicone has torn off and may have entered the air channel. Wash your hands if e-liquid has touched your skin. In Australia, where a quick “no worries” approach can sometimes mean rushing a small task, taking an extra minute here is the safer choice.

Check The Pod Before First Use

After the silicone seal is removed, connect the pod to the TP800 battery or device as directed by the packaging. It should sit evenly and securely without needing pressure. If it feels loose, sits at an angle or leaves a large gap, remove it and check that no packaging material remains around the connection.

Some prefilled pods need a short pause after opening so e-liquid can settle around the coil. Follow the manufacturer’s directions rather than taking repeated draws immediately. A burnt taste, gurgling, liquid in the mouth or very weak vapour may indicate that the pod is not seated properly, the coil is flooded or the unit is faulty.

Wipe the mouthpiece with a clean, dry tissue before use. Never rinse the pod or immerse the battery in water. If e-liquid reaches your eyes, rinse with clean water and seek medical advice if irritation continues. Nicotine can be harmful when swallowed or absorbed in significant amounts, so any spill should be treated promptly.

The TP800 is intended for adults who already use nicotine products. It is not suitable for non-smokers, children, pregnant people or anyone who has been advised to avoid nicotine. Store it in a cool, dry place rather than in a hot car, a common concern during an Australian summer in places such as Brisbane, Perth or western Sydney.

Handle A Stuck Or Leaking Pod

A silicone plug can feel unusually tight when the pod has been stored in a cool environment or when the rubber has adhered to the plastic. Let the unopened pod reach normal room temperature, keep it upright and try again with clean fingers. Do not heat it with a hairdryer, place it in direct sun or warm it on a dashboard.

If the seal has stretched, split or left rubber behind, do not attempt to trim the remainder and carry on vaping. A damaged opening may allow e-liquid to leak into the battery connection. Put the pod in a small sealed bag, keep it away from children and contact the seller with clear photos of the packaging, plug and pod.

A leaking device should not be carried loose in a pocket or handbag. E-liquid can damage fabrics and electronics, and a wet battery contact may cause poor operation. Do not charge a device that has liquid around its charging port. Clean only the exterior with a dry or slightly damp cloth, then allow it to dry fully before following the product instructions.

If the TP800 produces a harsh burnt taste even after correct installation, stop using it. Prefilled pods are sealed units and are not designed to be refilled, opened or repaired at home. Disposal rules vary across councils, so follow local guidance for batteries and electronic waste instead of placing a rechargeable device in ordinary household rubbish.

Buy And Use The Right Replacement

When ordering a replacement pod or another Lost Mary product, compare the model name carefully. The TP800, BM600, BM600S and BM6000 belong to different ranges, and their pods, batteries and charging arrangements are not automatically interchangeable. A BM600 guide may explain general puff-life expectations, but it does not replace the TP800’s own fitting instructions; this usage guide concerns a different model.

Check the listed nicotine concentration, flavour, capacity and number of pods before paying. Australian buyers should also consider how the product is supplied and whether it meets current local requirements. Vaping rules can differ in practical application between states and territories, and pharmacy supply, prescriptions, import arrangements and approved product conditions may change. A chemist in Melbourne, a pharmacy in Adelaide and a tobacconist near a Queensland servo may not offer the same range or advice.

For a broader comparison of available devices and accessories, browse the Lost Mary collection. Select the exact TP800 listing, read the product details and confirm that the pod format matches your battery. Genuine packaging, consistent labelling and a clear nicotine warning are useful signs, although they should not replace purchasing from a trusted seller.

If you are comparing flavours or waiting for a suitable replacement to come back into stock, you can save a product to your wishlist. Keep nicotine products out of sight and reach of children, avoid sharing mouthpieces, and do not use a vape while driving or when it affects your attention.

Remove the TP800’s silicone seal with clean fingers, gentle pressure and patience. Inspect the pod before fitting it, stop when there is damage or leakage, and use the device only according to its instructions. For Australian adults who choose nicotine vaping, careful handling helps protect the pod, the battery and the people around it.