How to Prime a New Lost Mary Tappo Pod for Better Taste
A new Lost Mary Tappo pod needs a short settling period before it is ready to use. Priming allows the e-liquid to reach the coil and wick properly, helping prevent a dry, harsh draw and allowing the flavour profile to develop as intended.
The process is simple, but rushing it can affect the first several puffs. Whether you have chosen fruit, menthol, tobacco, or a mixed flavour, correct pod preparation makes a noticeable difference to vapour quality and coil performance.
The Tappo range is designed for adult smokers and vapers who want a compact pod system with prefilled pod convenience. Before opening the packet, check the flavour, nicotine strength, pod compatibility, and expiry information printed on the packaging.
Nicotine is addictive, and vaping products are intended for adults only. Australian rules around nicotine supply, prescription access, importation, and vaping in public places can change, so check current federal and state or territory requirements before purchasing or using a product.
Check the pod and device first
Start by inspecting the Tappo pod for damage, leaks, or a broken seal. The mouthpiece should be clean, and the contact area at the base should be dry. If the pod looks cracked, feels unusually wet, or has leaked inside its packaging, do not insert it into the battery.
Confirm that you have the correct Tappo pod for your device. Pods from other Lost Mary ranges may look similar while using different fittings or coil designs. The device should also be free from dust or e-liquid around the connection points. A clean, dry connection helps the battery recognise the pod and deliver power consistently.
For an overview of available Lost Mary products and accessories, browse the Lost Mary range before ordering replacement pods. Product pages can help you compare listed flavours, nicotine strengths, capacities, and compatibility details.
Remove the protective seals
Most new pods include silicone plugs, stickers, or other protective pieces covering the airflow openings and mouthpiece. Remove every seal shown in the instructions. Leaving one in place can restrict airflow, create a tight draw, or stop the pod from working correctly.
Handle the pod by its outer casing rather than pressing hard on the mouthpiece. Avoid using sharp objects to prise off seals, as this may damage the pod or puncture a section that should remain closed. If the pod is prefilled and sealed, do not try to open it or add extra liquid.
Look closely at the base after removing the packaging. Any liquid on the outside should be wiped away with a dry tissue. E-liquid should not be swallowed or left on the skin, and used packaging should be kept away from children and pets.
Insert the pod without forcing it
Hold the Lost Mary Tappo device upright and gently place the pod into the pod bay. It should slide into position with little resistance and sit flush with the device. If it does not fit easily, remove it and check its orientation rather than pushing harder.
Some Tappo devices use magnetic connections, while the exact fitting can vary by model. Once the pod is seated, give the device a few seconds to recognise it. If there is an activation button, follow the product instructions; if it is draw-activated, take a normal inhale only after the soaking period.
A new pod should not be shaken aggressively. Vigorous movement can introduce air bubbles into the liquid path and may contribute to gurgling. Keep the device upright while the coil absorbs the e-liquid.
Allow the coil to soak
Once the pod is installed, leave it standing upright for around five to ten minutes. This is the main priming stage. The wick inside the pod needs time to become fully saturated before heat is applied.
Waiting is especially important with thicker e-liquid or a pod that has been stored in a cool place. In colder areas of Australia, such as parts of Victoria or Tasmania, liquid may move more slowly through the wick. A little extra settling time can help produce a smoother first draw.
Do not take repeated “dry pulls” while the pod is soaking. Drawing without activating the coil may move liquid unevenly and will not replace the recommended waiting period. If the pod has been left unused for a long time, allow it to stand upright again before vaping.
Take gentle first puffs
After the soaking period, begin with one or two short, gentle puffs. Avoid a long, forceful inhale on the first draw, as this can heat the coil faster than liquid can reach it. A relaxed mouth-to-lung draw is generally more suitable for a compact pod device.
Pause for several seconds between the first few puffs. This gives the wick time to resupply the coil and lets you assess the flavour. A properly primed pod should produce a clean taste and consistent vapour without a burnt, dry, or unusually hot sensation.
If the flavour seems faint at first, give the pod another minute or two before taking more puffs. New pods can need a short break-in period, and flavour perception may change after the coil has been used gently a few times.
Prevent dry hits and leaking
Keep the device upright whenever possible, particularly in a pocket, bag, or cup holder. Lying the pod on its side for long periods can encourage condensation or liquid movement around the airflow channel. Wipe the mouthpiece occasionally with a clean tissue.
Australian weather can affect pod storage. A Tappo left in a hot car during a Queensland summer afternoon may become more prone to leaking, while direct sun can alter the liquid and soften seals. Store it in a cool, shaded place rather than in a glovebox, on a dashboard, or beside a window.
Gurgling usually indicates excess liquid or condensation in the airflow path. Remove the pod, wipe the base, and clean the device connection gently. A burnt taste, however, may indicate that the coil has been overheated or that the pod is empty. Do not continue using a pod that tastes persistently burnt.
If you are changing from one flavour to another, a small amount of the previous taste may remain in the pod or mouthpiece. For a clean flavour change, use a fresh compatible pod rather than attempting to rinse or refill a sealed one.
Know when to replace the pod
A Tappo pod is ready for replacement when the flavour becomes consistently muted, vapour production drops, the draw changes, or a burnt taste remains after the device has rested. Repeated leaking is another reason to stop using it and inspect the pod for damage.
Never force extra liquid into a prefilled, sealed pod. Tappo products and replacement pods can differ by model, so follow the instructions supplied with the specific product. If you use a refillable version, only add the recommended e-liquid and leave enough space to prevent flooding.
For broader guidance on changing compatible Lost Mary pods, use this pod replacement guide. It is useful when checking removal, installation, and handling steps rather than guessing from the pod’s appearance.
Buying genuine products also matters for fit, flavour consistency, and safety information. If you are comparing a Tappo system with another Lost Mary format, the BM600 and BM600S comparison can help explain how different product styles may suit different routines.
Prime each new pod patiently, keep it upright, and begin with light puffs rather than trying to produce large clouds immediately. Check the packaging and current Australian requirements, then choose genuine compatible pods from Lost Mary Pro for reliable product information and a smoother first use.